North Dakota Legionella Compliance & Water Quality Standards
Executive Overview
North Dakota DHHS enforces hospital environmental safety under N.D. Admin. Code 33-07-01.1. Extremely hard groundwater supplies (17 GPG) require scale mitigation.
Governing Public Health Agency & Reporting Mandates
- Agency Name: ND Dept of Health & Human Services (NDHHS)
- Infectious Disease Reporting Hotline: (800) 472-2180 (Disease Control Division)
- Main Contact Phone: (701) 328-2372
- Official Portal: https://www.hhs.nd.gov
- Mandatory Reporting Window: All diagnosed cases of Legionellosis (Legionnaires' disease / Pontiac fever) must be reported to ND Dept of Health & Human Services (NDHHS) within 24 hours.
Statutory & Regulatory Citations
- N.D. Admin. Code 33-07-01.1: Hospital Licensure Rules - Environmental Safety (North Dakota Department of Health & Human Services) — Enforced via State Licensing Inspection
Regional Water Chemistry & Disinfection Profile
- Dominant Municipal Disinfectant:
FREE CHLORINE - Typical Distribution Residual: 0.5 – 2.2 mg/L (ppm)
- Average Water Hardness: 17 GPG (291 mg/L CaCO₃) — Classified as VERY_HARD
- Calculated Scaling Risk: EXTREME
- pH Operating Range: 7.5 – 8.4
- Regional Water Contaminants / Vectors: Extreme groundwater hardness, Sulfate / TDS
Mandatory Environmental Testing Cadence
| System Type | Facility Scope | Frequency | Required Test Method | Compliance Notes |
|---|---|---|---|---|
| Domestic Hot | healthcare | Quarterly_90d | CDC ELITE Culture ISO11731 | Quarterly testing in licensed inpatient facilities. |
Action Thresholds & CAPA Containment Protocols
Potable Water — Level 3 Critical Emergency (10+ CFU/mL)
- Mandatory Containment Protocol:
- Notify NDHHS within 24 hours.
- Clearance Verification Retest: Within 7 days.
- Mandatory Public Health Notification: Within 24 hours.
Surveyor & CMS Audit Defense Checklist
- Active ASHRAE 188 Water Management Plan (WMP) updated within the last 12 months.
- Water Safety Team Charter with designated Infection Prevention, Facilities, and Clinical leads.
- Process Flow Diagrams (PFDs) identifying point-of-entry, booster pumps, calorifiers, and distal sample locations.
- Daily / Weekly Physical & Chemical Monitoring Logs (temperature and disinfectant residual).
- Closed-Loop Corrective Action Logs (CAPA) documenting immediate remediation for any out-of-spec reading.